Fashion, Inc.
Carports and Walkway Covers
Text Box: Steel or aluminum carports, canopies, walkway covers and marquees are available in freestanding, attached and overhead support configurations. All components are ready for erection as received with pre-punched deep V rollformed roof panels and pre-punched rollformed gutters.

Aluminum window and store front awnings are available in ventilated or solid top design and are shipped assembled for your convenience.
Text Box: ENGINEERING
At Fashion's headquarters there is a complete design engineering department including structural engineers. Upon request, proposal drawings and stress calculations can be furnished. Any live load and wind load can be provided to meet your building code specifications. Specifications for each product line available upon request.

INSTALLATION
Installation can be accomplished using standard industry practices. Installation instructions are shipped with all products. No special tools or mechanical seaming machines required to install these products. Fashion products are prefinished, inspected, and packaged prior to shipment. Reasonable care must be used when handling, storing, and installing to prevent damage to product.

MAINTENANCE
Fashion's high performance baked on finishes need little or no maintenance. Should cleaning be desired, washing with a mild soap and water followed by a clean water rinse will remove accumulations.

CONSTRUCTION
All Fashion carports, canopies, walkway covers and marquees are shipped KD (knocked down) complete. Roof panels are cut to length and pre-punched. Complete assembly hardware is included in each shipment.
Fashion Inc.
1019 North St., P.O. Box 1050
Ottawa, Kansas   66067-1050
Phone (800) 255-1009
Fax (785) 242-2022
E-mail fashioni@fashioninc.com
a member of the
Image Resource Group